SUKO-1

Products

Hello, come to consult our products !
  • wholesale Moly Filled PTFE Molding Tubing price

    wholesale Moly Filled PTFE Molding Tubing price

    Virgin PTFE is capable in its own right, but when mineral fillers, such as molybdenum sulfide, are added, it enhances the material wear and deformation characteristics to more fully exploit their unique combination of chemical, physical and electrical properties. Molybdenum Disulfide (PTFE-MoS2): Added in various amounts (5% to 15%), increases hardness, stiffness, and wear; minimal effect on chemical and electrical properties. APPLICATIONS:Slide covers;Bearings, bushings. ADVANTAGES:Good slid...
  • wholesale 20 mm PTFE Sheet price

    wholesale 20 mm PTFE Sheet price

    PTFE, also known under the brand name polymer, is a soft fluoropolymer mechanical plastic with exceptional resistance to high temperatures, chemicals, corrosion and stress cracking. PTFE features impressive heat, mechanical toughness, electrical and low friction properties, making it the material of choice for many high heat and low friction applications. PTFE plastic is available in FDA approved, electrical, mechanical, glass-filled and bearing grades. Specifications: 100% Pure PTFE Sheet C...
  • wholesale PTFE Rod Dia 35mm price

    wholesale PTFE Rod Dia 35mm price

    PTFE rod is generally used as machining stock for all kinds of chemical, electrical and mechanical components where the outstanding performance characteristics of PTFE are required. Various fillers are available to modify the properties of PTFE to meet application requirements. Specification: OD 35mm material:100% PTFE virgin moulded rod quality: white,smooth,no air hole Special gravity : 2.10 ~ 2.30 Tensile strength: 20.0 MPa Ultimate elongation: 150% aging resistance radiation resistance l...
  • wholesale 3m PTFE Film Tape price

    wholesale 3m PTFE Film Tape price

    PTFE plastic sheet comes in a roll in the .005 – .020 thickness. If you order more than 1 pc, it will be cut from a roll. In thicknesses greater than .020, we stock a 48 x 48 and cut to the increments you see listed. From these sizes, ANY size can be cut or machined!   PTFE has the highest melting point and is capable of continued service at 500F(260 C). FEP is a melt processible resin capable of continued service at 400F(204 C). PTFE products are used as gasket and packing materia...
  • wholesale Molded PTFE Rod Thick 6mm – 660mm price

    wholesale Molded PTFE Rod Thick 6mm – 660mm price

    Molded PTFE rod is generally used as machining stock for all kinds of chemical, electrical and mechanical components where the outstanding performance characteristics of PTFE are required. Various fillers are available to modify the properties of PTFE to meet application requirements. Fluoro-Plastics compression molds rods and cylinders for machining in a wide range of sizes. The most common sizes are listed in the table below, but many other combinations of OD and ID are available.  Molded r...
  • wholesale Filled PTFE Film price

    wholesale Filled PTFE Film price

    Skived, filled PTFE film coated one side, silicone adhesive;Low coefficient of friction;Outstanding abrasion resistance, which equates to 500-fold increase in wear resistance over standard PTFE;Chemically inert;Excellent high temperature resistance; Features:This tape has a self-lubricating surface and conformable backing. The tape construction is stable, non-toxic and weather resistant.